Welcome To The Andover Mining Corp HUB On AGORACOM

Edit this title from the Fast Facts Section

Free
Message: Rio Tinto...

didnt realize that u needed to subscribe to read full article, sorry...

Meet at the Center of the Earth'

By JOHN W. MILLER

BINGHAM CANYON, Utah—Miners have drilled, blasted and dug 19 million tons of copper out of this valley—enough for all the nickels, dimes and quarters ever minted—in what is the world's deepest surface mine.

There is plenty more in an untapped region far below the mine, and owner Rio Tinto, RIO.AU -1.69% the global mining behemoth, is investing $165 million to explore the area, which may hold some $5 billion worth of copper.

Some mining companies that have relied mostly on surface mining—the removal of ground over minerals near the Earth's surface—are going deeper. Mineral deposits are often concentrated in the same region. Once the surface deposits are depleted, miners can now dig further, rather than scout for new reserves and then have to build infrastructure to mine, process and transport those resources.

New technology—robotic drills and high-strength pipe alloys, for instance—makes it possible to go twice as deep, and the relatively high prices for commodities make it financially feasible, too.

At Bingham Canyon, Rio Tinto has already dug an open-pit mine that is 2,000 feet deep and 2.5 miles wide. To reach new copper deposits it will need to dig underground mine shafts to a total depth of 4,000 feet—about twice as deep as most mines.

Easy-to-find, near-surface deposits "have pretty much been found already," said Richard Hillis, chief executive of Australian-based Deep Exploration Technologies Research Centre, a consortium of mining companies and geologists devoted to overcoming the technical challenges of deeper mining. Most mines—surface mines and conventional underground mines—are less than 2,000 feet deep. With the Earth's crust typically between three and 30 miles thick, huge reserves of minerals are sitting below existing mines.

John W. Miller/The Wall Street Journal

Rio Tinto is exploring copper deposits deep below its surface mine in Bingham Canyon, Utah, above.

There are risks. Going deeper is expensive. Companies must dig elaborate systems of underground tunnels and invest in different types of equipment, such as robotic drills that can change direction underground. Deeper adds elements of danger to the people who mine.

Going deeper also means going below water tables, and liquid encountered along the way must be pumped back to the surface. That creates environmental risks such as waste from mining operations leaking into water tables. Deeper mines produce more waste rock that must be piled on the surface.

"As you go deeper, you generate more waste material," said Bonnie Gestring, a Missoula, Mont., campaigner for Earthworks, an environmental-advocacy group.

Mining companies say they capture and treat contaminated water, return land to its original conditions when they are finished mining and that digging deeper means they don't have to venture into virgin territory.

Daniel Edelstein, copper specialist at the U.S. Geological Survey, said surface mining, where minerals are loosened from the surface with explosives and which provides the economies of scale needed to turn big profits on global commodities markets, will remain the standard.

"The 18 biggest U.S. copper mines are still open pit," he said. "What we're going to see in the future is a mix, where some major mines have both open pit and underground operations."

The Australian and Canadian governments have set up industry-funded research centers to figure out how to go further underground. Officials joke that the two countries will "meet at the center of the Earth."

Most mineral deposits were formed by volcanic activity and tectonic plate shifts. Similar deposits tend to lurk nearby.

"The best place to hunt for an elephant is near other elephants," Preston Chiaro, Rio Tinto's group executive for technology and innovation, said, employing industry slang for rich deposits.

The copper elephants of Bingham Canyon, located 20 miles from Salt Lake City, were first mined industrially in 1906 after being discovered during the 19th century gold rush. So far, more than $200 billion worth of minerals have been extracted. Bingham Canyon copper is being used to make this year's London Olympic medals.

In the 1980s, geologists discovered another juicy copper deposit, or skarn, below the existing mine, where 38 million years ago, copper-rich magma had surged up into the Earth's crust, depositing a cluster of minerals into existing limestone beds to create a deposit called a skarn.

In 2007, with the global economy and the housing market still robust, Rio Tinto decided to mine the so-called North Rim Skarn. A year later, the economy tanked. Rio Tinto put the skarn on ice, an example of the fragile commodity-price-dependent economics of mining, and the higher costs of going underground. Then, as prices climbed, in 2010 Rio Tinto restarted the project and put Barry Gass, a 40-year-old engineer, in charge of a team of 42 underground-mining experts.

To get at the skarn, Mr. Gass is supervising the construction of a tunnel that begins on the bottom of the open-pit mine, 2,000 feet below the surface of the earth. A drill machine that looks like a dragon snake from a science-fiction movie advances a dozen feet per day.

The walls of the tunnel are coated with steel mesh and sprayed with cement. Workers then set up drilling platforms to extract core samples—baseball bat-thick tubes of rock—to check for quality and consistency. Rio Tinto announced a preliminary estimate for the skarn: 730,000 tons of copper, which is worth some $5 billion at current prices.

"This is a small deposit, but it's very high grade," said Mr. Gass, director of underground exploration at the mine, which will require less manpower than older underground mines because of new techniques and increased use of robotics.

Much of the special underground-drilling equipment comes from Boart Longyear Ltd. BLY.AU -1.65% of Salt Lake City drill seller and operator, whose founder, E.J. Longyear, pioneered the use of drilled core samples in 1890. CEO Craig Kipp said the push to go ever deeper has been dramatic. "Ten years ago, we were selling drills for 500 feet; now it's 1,000 and 1,500 feet," said Mr. Kipp. Last year, sales at Boart were up 36% to $2.02 billion.

With mining companies drilling further underground, the company has increased the horsepower of rigs so they can pull up samples from deeper parts of the earth and made drills lighter, tougher and more heat resistant. A new drill bit has hundreds of layers of synthetic diamonds so that a set of diamond points is ready to replace one that has been worn away.

At Boart Longyear's Salt Lake City yard, operations manager Bob Buto showed off what looks like a firetruck that costs $1.6 million. It has drills that penetrate the earth to pull up samples and a suction pipe that brings underground water to the surface. "This rig can [reach] 3,000 feet," says Mr. Buto

Other companies that are mining, or plan to mine, below current surface mines include BHP Billiton BBL +3.23% at its Ekati mine in northern Canada and Chile's state-owned Codelco at its biggest surface mine, Chuquicamata, in northern Chile. Rio Tinto's Oyu Tolgoi mine, under construction in Mongolia, is expected to be a mix of surface and underground mining.

Said Rio's Mr. Gass: "Underground mining is becoming one of the things you now need to do to stay competitive in copper."

Write to John W. Miller at john.miller@wsj.com

Share
New Message
Please login to post a reply