Dec. 15, 2009 (Business Wire) -- Bayswater Uranium Corporation (TSX-V: BAY), (OTC: BYSWF) reports it has received results from drilling at the Kilgore Gold Project (“Kilgore”) in Clark county, Idaho, by Otis Gold Corp (TSX-V: OOO), (“Otis”) who have the option to earn up to a 75% interest in Kilgore. The drill results comprise both high-grade, underground and bulk-tonnage, open-pittable intercepts from the first seven assayed core holes of Otis’s continuing 2009, 12 core hole, 3,100 metre drill program at Kilgore. Highlights of the seven drill holes, listed in Table 1 below, include high-grade intercepts of 9.5 metres (m) of 11.6 grams per tonne gold (g/t Au) in hole 09 OKC-199 and 10.2 m of 9.8 g/t Au in 09 OKC-204, and bulk-tonnage intercepts of 84.8 m of 1.37 g/t Au in 09 OKC-197 and 95.6 m of 1.46 g/t Au in 09 OKC-204. All seven holes contain numerous intervals of anomalous gold mineralization, with many of the bulk-tonnage intercepts between 50-metres and 120-metres thick (see Table 2 below for further details).

Table 1. Kilgore Gold Project 2009 Drill Program Highlights

The results from these new holes confirm the presence of: (1) high-grade intercepts in high-angle, north- to northeast-trending quartz vein/stockwork breccia zones cutting an extensive and relatively flat-lying 45-metre-thick argillized structural zone where diking occurs, generally from 45-metres to 100-metres deep throughout the Mine Ridge area (9.5 m of 11.6 g/t Au in 09 OKC-199 and 10.2 m of 9.8 g/t Au in 09 OKC-204); (2) deeper, high-grade material at and along the Tertiary volcanic host rock/underlying Cretaceous Aspen sedimentary host rock contact near and at the base of the deposit, where diking occurs (2.8 metres of 9.15 g/t Au and 18.2 m of 3.37 g/t Au in 09 OKC-197); and (3) widespread, bulk-tonnage intercepts throughout the Mine Ridge area, that contain most of the high-grade intercepts (84.8 m of 1.37 g/t Au in 09 OKC-197 and 95.6 m of 1.46 g/t Au in 09 OKC-204). Visible gold was found in high-grade veins associated with dikes in three of the holes, 09 0KC-197, 199, and 204. Most of the new intervals contain mineralized thicknesses and average grades which are noticeably greater than those constituting the majority of the intervals comprising the historic Kilgore NI 43-101 compliant resource (Otis March 2, 2009 News Release). As a result, Otis believes that a strong possibility exists to increase the overall size, grade, and economic viability of the Kilgore bulk-tonnage deposit.

All holes were drilled in the Mine Ridge area, the core of the existing Kilgore deposit, to test for zones of high-grade mineralization contained within the Kilgore NI 43-101 compliant bulk-tonnage resource (Otis March 2, 2009 News Release). This area was only partially drill-tested by Bear Creek, Pegasus Gold, Placer Dome U.S., and Echo Bay Mines between 1983 and 1996, while exploring the property for a bulk-tonnage gold deposit (see Otis News Release dated June 10, 2008).

Locations of the seven holes, which total 1,737 metres of drilling, and their corresponding assay intercepts, are shown in a drill-hole location map and two geologic sections available on the Otis Gold Corp. website at http://www.otisgold.com/projects/kilgore/. The north-trending section through the Mine Ridge area shows a roughly 70-metre thick or greater section of mineralization that remains open in numerous directions. The west-trending section located normal to the southern end of the north-trending section reveals mineralization roughly 60 metres below the surface that is up to nearly 120-metres thick, 170-metres wide, and remains open in various directions. Further expansion drilling is planned in these areas during 2010.

Table 2 below provides further detailed results of the seven holes:

Table 2. Kilgore Gold Project 2009 Drill Program Intercepts