Belvedere Provides Status Update on Hitura Nickel Mine and Kopsa Gold Project
posted on
Jul 20, 2013 09:55PM
Developing nickel and gold in Finland
VANCOUVER, BRITISH COLUMBIA--(Marketwired - July 19, 2013) - Belvedere Resources Ltd. (TSX VENTURE:BEL) ("Belvedere"), announces a temporary suspension of pumping at the Hitura Nickel Mine, as well as exploration results from the South Hitura drilling programme and provide a general status update on their operations in Finland.
David Pym CEO states "Due to the continuing low nickel prices, and in recognition of the higher marginal cost of production of the deep ores, the Company intends to let the lower levels of the mine flood as a cost saving measure, whilst leaving the majority of the underground mine infrastructure and the shallower west and south ores intact. The exploration drilling at South Hitura has been successful in substantially extending the mineralisation by more than 100m vertically downdip and the strike by more than 100m to the South. The zone remains open, and an updated resource estimate will be completed in due course. In the meantime, the company remains focused on completing the PEA for the nearby Kopsa gold copper deposit, assessing its potential for processing at the Hitura mill."
Hitura Nickel Mine Update The Hitura mine has been on care and maintenance since early June. In order to further preserve cash resources, the Company has now decided to suspend pumping at the Hitura Nickel Mine and let the mine water levels rise from the 620 level to the 430 level. This is expected to take approximately three months. Around 120,000 t of developed ore, which approximates three months of underground production will be affected by the water rise. The main mine infrastructure, and the West ores and South ores will be unaffected by the flooding. Should the nickel prices improve, pumping of the lower levels could resume and the majority of the deep ores could be accessed again. Management will continue to monitor the nickel price and provide further updates on the status of the mine in due course. Environmental permitting for re-opening the open pit has been received but current nickel prices are too low for restart, even with the cost synergies of the open pit.
Kopsa Gold Copper Project The Kopsa PEA (Preliminary Economic Assessment) being completed by SRK Consulting (Sweden), is due at the end of the summer. Environmental permitting is ongoing in parallel to the economic studies. The PEA is assessing the economic viability of processing Kopsa ores through the Hitura mill.
South Hitura Exploration Programme has been very successful in extending the existing near surface ore zones by more than 100m vertically and a further 100 m along strike. Actual grades are similar to the north Hitura ores but preliminary flotation tests indicate much higher recoveries of nickel in concentrate with up to 84% recoveries achievable in bench scale tests, compared to the 60-70% recoveries typical of the north zone.
Highlights of the drilling include:
Details of the South Hitura intersections are presented below in Table 1
HOLE_ID | FROM | TO | Interval | Ni% | Cu % | Co % | GT |
R-2177 | 79.00 | 81.00 | 2.00 | 0.54 | 0.12 | 0.05 | 1.1 |
R-2177 | 94.00 | 106.00 | 12.00 | 0.67 | 0.29 | 0.05 | 8.1 |
R-2178 | 88.25 | 90.25 | 2.00 | 0.61 | 0.26 | 0.05 | 1.2 |
R-2178 | 100.25 | 105.60 | 5.35 | 0.60 | 0.25 | 0.05 | 3.2 |
R-2179 | 75.70 | 80.65 | 4.95 | 1.21 | 0.36 | 0.10 | 6.0 |
R-2179 | 90.75 | 94.75 | 4.00 | 0.51 | 0.16 | 0.04 | 2.0 |
R-2179 | 96.75 | 103.30 | 6.55 | 0.80 | 0.28 | 0.06 | 5.2 |
R-2180 | 85.05 | 93.50 | 8.45 | 0.65 | 0.28 | 0.07 | 5.5 |
R-2185 | 76.00 | 78.00 | 2.00 | 0.52 | 0.30 | 0.05 | 1.0 |
R-2185 | 80.00 | 82.00 | 2.00 | 0.51 | 0.13 | 0.05 | 1.0 |
R-2185 | 89.35 | 91.35 | 2.00 | 0.64 | 0.23 | 0.05 | 1.3 |
R-2187 | 200.15 | 206.50 | 6.35 | 0.94 | 0.15 | 0.09 | 6.0 |
R-2188 | 98.00 | 108.40 | 10.40 | 0.82 | 0.20 | 0.06 | 8.6 |
R-2189 | 82.90 | 105.65 | 22.75 | 0.84 | 0.38 | 0.06 | 19.0 |
R-2191 | 198.10 | 200.10 | 2.00 | 1.41 | 0.14 | 0.13 | 2.8 |
R-2193 | 61.35 | 65.00 | 3.65 | 0.61 | 0.20 | 0.07 | 2.2 |
R-2198 | 87.50 | 89.50 | 2.00 | 0.88 | 0.23 | 0.08 | 1.8 |
R-2198 | 92.50 | 99.20 | 6.70 | 0.56 | 0.29 | 0.05 | 3.7 |
R-2206 | 121.80 | 137.00 | 15.20 | 0.84 | 0.46 | 0.07 | 12.8 |
R-2206 | 142.70 | 146.05 | 3.35 | 0.87 | 0.14 | 0.06 | 2.9 |
R-2207 | 82.00 | 84.00 | 2.00 | 0.92 | 0.20 | 0.08 | 1.8 |
R-2207 | 94.00 | 107.40 | 13.40 | 0.87 | 0.28 | 0.06 | 11.6 |
R-2209 | 109.00 | 111.00 | 2.00 | 0.52 | 0.09 | 0.05 | 1.0 |
R-2209 | 140.30 | 159.15 | 18.85 | 0.76 | 0.28 | 0.06 | 14.3 |
R-2212 | 152.50 | 155.20 | 2.70 | 0.93 | 0.16 | 0.07 | 2.5 |
R-2213 | 166.45 | 172.10 | 5.65 | 0.63 | 0.16 | 0.05 | 3.5 |
R-2215 | 185.20 | 187.20 | 2.00 | 0.62 | 0.08 | 0.09 | 1.2 |
R-2215 | 219.00 | 225.00 | 6.00 | 0.52 | 0.53 | 0.07 | 3.1 |
R-2221 | 131.50 | 140.10 | 8.60 | 0.69 | 0.41 | 0.06 | 5.9 |
R-2221 | 152.55 | 164.05 | 11.50 | 1.13 | 0.24 | 0.09 | 13.0 |
R-2227 | 139.50 | 141.50 | 2.00 | 0.52 | 0.14 | 0.07 | 1.0 |
R-2227 | 166.30 | 169.15 | 2.85 | 0.63 | 0.14 | 0.06 | 1.8 |
R-2227 | 180.55 | 182.75 | 2.20 | 1.48 | 0.70 | 0.12 | 3.3 |
R-2228 | 198.95 | 202.95 | 4.00 | 0.53 | 0.58 | 0.07 | 2.1 |
R-2228 | 215.90 | 221.10 | 5.20 | 0.82 | 0.10 | 0.10 | 4.3 |
Table 1: Intersections using a 0.5 % Ni cut-off. No top cut is applied. Maximum grade is 3.3 % Ni over 0.3m, with 14 individual assays over 2% Ni. Intersections are estimated to be 70-90% of true width.
HOLE_ID | Easting | Northing | Z | Length | Azimuth | Dip |
R-2177 | 1176.76 | 2993.93 | -220.96 | 119.80 | 296.1 | 15.2 |
R-2178 | 1176.84 | 2994.10 | -220.51 | 124.00 | 297.2 | 3.8 |
R-2179 | 1176.76 | 2993.93 | -220.96 | 119.80 | 296.5 | -9.7 |
R-2180 | 1176.90 | 2994.04 | -221.26 | 135.10 | 298.4 | -26.0 |
R-2183 | 1176.88 | 2993.87 | -220.10 | 119.70 | 268.8 | 15.1 |
R-2185 | 1176.76 | 2993.88 | -221.07 | 112.20 | 269.0 | -10.1 |
R-2187 | 1176.52 | 2992.93 | -222.03 | 212.50 | 268.5 | -47.8 |
R-2188 | 1176.73 | 2993.96 | -219.48 | 110.00 | 282.7 | 27.9 |
R-2189 | 1176.65 | 2993.39 | -220.00 | 110.60 | 283.0 | 15.7 |
R-2190 | 1176.49 | 2993.37 | -220.77 | 119.70 | 282.6 | -8.2 |
R-2191 | 1176.43 | 2993.12 | -222.02 | 209.50 | 271.1 | -48.9 |
R-2192 | 1188.25 | 3016.33 | -219.94 | 116.70 | 298.4 | 27.4 |
R-2193 | 1188.55 | 3015.97 | -221.10 | 127.10 | 297.5 | 2.1 |
R-2197 | 1201.64 | 3040.09 | -221.12 | 117.90 | 297.6 | 9.9 |
R-2198 | 1201.68 | 3039.97 | -221.66 | 131.80 | 297.5 | -7.9 |
R-2199 | 1201.63 | 3040.04 | -222.14 | 151.50 | 296.6 | -28.5 |
R-2206 | 1176.74 | 2993.95 | -221.83 | 157.10 | 299.0 | -36.5 |
R-2207 | 1176.80 | 2993.99 | -220.60 | 119.70 | 283.1 | 5.1 |
R-2208 | 1176.87 | 2993.95 | -221.39 | 130.20 | 282.5 | -23.9 |
R-2209 | 1176.63 | 2993.78 | -221.83 | 166.70 | 266.6 | -29.2 |
R-2210 | 1188.67 | 3016.08 | -221.71 | 131.80 | 297.5 | -24.3 |
R-2212 | 1213.51 | 3062.33 | -222.36 | 165.50 | 297.5 | -17.8 |
R-2213 | 1176.95 | 2994.00 | -222.00 | 184.10 | 301.3 | -49.7 |
R-2215 | 1173.11 | 2983.32 | -221.84 | 237.90 | 244.3 | -47.9 |
R-2221 | 1172.58 | 2983.56 | -221.25 | 176.70 | 254.3 | -27.4 |
R-2227 | 1172.53 | 2983.48 | -221.75 | 206.40 | 252.7 | -38.9 |
R-2228 | 1172.87 | 2983.53 | -221.83 | 237.80 | 254.1 | -49.2 |
Table 2: Details of drillhole locations
The drilling was undertaken by Nivalan Timanttikairaus Oy of Finland, providing 30 mm diameter core. A company geologist logs the core, and marks the sample intervals based on sulphide mineralisation and lithology. Sample lengths are typically between 0.20 metres and 6 metres in length. Core samples are split in half on site, with half being crushed in a cone crusher. A 500g sub sample is milled using a ring mill. 200mg of the milled sample is dissolved in HNO3 and assayed for Ni and Cu by AAS at the Hitura Mine Laboratory, as has been the practice for many years. Approximately 5% of samples are sent to Labtium Oy of Finland (Accredited Laboratory) for check assays, and are subject to the typical Labtium Oy QA/QC procedures. The remaining half core and crushed sample is retained on site for verification and reference purposes.
About Belvedere:
Belvedere Resources Limited is a mining company incorporated in British Columbia with a primary focus on nickel, gold, cobalt and copper in Finland. The Company produced 2200t of nickel in concentrate in 2012 from the Hitura nickel mine in Central Finland. The Hitura Mine was put into Care and Maintenance in June 2013. The Company has a number of advanced gold projects in close proximity to the Hitura mine.
Forward Looking Statement:
Some of the statements contained herein may be forward-looking statements, which involve known and unknown risks
and uncertainties. Without limitation, statements regarding future plans and objectives of the Company (including statements relating to future nickel prices and consequent decisions regarding the Hitura nickel mine, resource estimates of South Hitura and the results and timing of the Kopsa PEA) are forward-looking statements that involve various degrees of risk. It is important to note that the Company's actual results could differ materially from those in such forward-looking statements.
Qualified Person
The technical aspects of this statement have been prepared by Dr Toby Strauss (CGeol), Chief Operating Officer of Belvedere Resources Ltd, who is acting as a Qualified Person in compliance with National Instrument 43-101 with respect to this release. Dr Strauss has verified the data supporting this press release. Verification included checking the data to the original Laboratory certificates,, reviewing sampling procedures and reviewing the geological interpretation.
BELVEDERE RESOURCES LTD.
David Pym, CEO
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the contents of this release.
David Pym
CEO
+1-604-844-2838
Toby Strauss
COO
+1-604-844-2838
www.belvedere-resources.com