Well it looks like it's closer to 5000 metres of drilling than it is 10,000 metres.
The news release does not mention the two drill holes in the Main/Liard zone.
The good drill hole DDH 432 is a geotechnical drill hole that extended the mineralization in the Paramount zone an additional 120 metres to the west.
DDH SCK-13-432 intersected an upper interval of copper-silver mineralization and a lower, much longer interval of copper-gold-molybdenum-silver mineralization. This hole located 200m south of DDH CF415-2011 tested a block of inferred resource and extended the mineralization an additional 120m to the west beyond the western edge of the inferred resource block. This drill hole also intersected a higher grade (76.5m core interval) zone of copper-gold-molybdenum-silver mineralization within the indicated resource block starting at a core interval of 81.0m.
Geotechnical Drill Holes:
|
|
|
|
|
|
|
|
|
|
|
|
| Zone |
DDH ID |
Dip |
Azimuth |
From (m) |
To (m) |
Interval (m) |
copper (%) |
gold (g/t) |
silver (g/t) |
molybdenum (%) |
Rec. Cu Eq (%) |
| Paramount |
SCK-13-432 |
60 |
270 |
18.0 |
56.3 |
36.75 |
0.198 |
0.062 |
1.69 |
0.004 |
0.22 |
|
|
|
and |
64.2 |
420.5 |
356.3 |
0.215 |
0.196 |
1.71 |
0.015 |
0.33 |
|
|
|
including |
81.0 |
157.5 |
76.5 |
0.399 |
0.444 |
4.39 |
0.028 |
0.67 |
|
|
|
and |
442.0 |
469.5 |
27.5 |
0.148 |
0.036 |
0.33 |
0.002 |
0.15 |
| Paramount |
SCK-13-433 |
55 |
090 |
387.0 |
495.0 |
108.0 |
0.187 |
0.029 |
1.16 |
0.025 |
0.25 |
|
|
|
and |
521.0 |
562.0 |
41.0 |
0.149 |
0.033 |
0.53 |
0.026 |
0.22 |
| Paramount |
SCK-13-437 |
55 |
090 |
No significant mineralization, hole terminated at 202m depth due to bad ground conditions |
|
| Paramount |
SCK-13-439 |
60 |
270 |
38.0 |
67.0 |
29.0 |
0.144 |
0.027 |
0.98 |
0.003 |
0.15
|
http://agoracom.com/ir/CopperFoxMetals/forums/discussion/topics/592387-new-presentation-with-drill-information/messages/1859599#message
