Here's the rest of the story. Golden chalice also had news......must be PDAC coming.

V.

Inspiration Intersects 0.313% Ni Over 48.88m or 160.37ft Containing 1.000% Ni Over 1.23m or 4.04ft (True Width)

TORONTO, ONTARIO, Feb 27, 2009 (MARKET WIRE via COMTEX News Network) --

Inspiration Mining Corporation (the "Corporation") (TSX: ISM) (FRANKFURT: O18) is pleased to announce the results of the continuation of their diamond drilling program on its Langmuir Project, located in Langmuir Township south of Timmins, Ontario. The Langmuir Property consists of 69 unpatented contiguous mining claim units covering approximately 1090 hectares in the north-central portion of Langmuir Township, Porcupine Mining Division, and District of Cochrane, Ontario. The property is approximately 25 km southeast of Timmins, Ontario, and hosts the past producing Langmuir No.1 Mine, and majority of the past producing Langmuir No. 2 Mine.

Inspiration is continuing the drilling at the Langmuir Project - Langmuir No.2 Mine - North Zone. The detail fill-in drill program is designed to complete the definition of the nickel bearing mineralization. Several drill holes were terminated in nickel bearing mineralization and these drill holes have been extended.

The following table indicates the drill information for the North Zone drill
holes:
------------------------------------...
Drill Hole Grid Grid Dip Azimuth Section Section Length
Northing Easting (Geodetic) Northing Easting (m)
(metres) (metres) (metres) (metres)
------------------------------------...
LN08-136 3081.83 2006.08 -70.01 299.53 3671.98 196.40 413.47
------------------------------------...
LN08-137 3082.73 1958.46 -55.85 299.03 3648.96 154.71 229.29
------------------------------------...
LN08-138 3082.57 1958.70 -61.17 298.32 3648.94 155.00 260.39
------------------------------------...
LN08-139 3055.72 2004.20 -54.37 300.57 3648.43 207.83 287.35
------------------------------------...
LN08-140 3055.61 2004.36 -61.89 300.38 3648.42 208.02 310.46
------------------------------------...

Drill hole LN08-136 was completed on Section 3675 North and below previously released drill holes LN08-133 to LN08-135.

Drill holes LN08-137 and LN08-138 were drilled approximately 41 meters west and 23 meters south of LN08-136 and LN08-139 and LN08-140 were drilled approximately 53 meters east of LN08-137. These drill holes were drilled down dip from previously released drill hole LN06-43 and up dip from previously released drill holes LN08-107, which contained 1.042% Ni over 9.95 meters or 32.64 feet (true thickness) from 282.40m to 296.00m.

The following revised assay results for drill holes LN08-136 to LN08-140, inclusively at the Langmuir No.2 Mine - North Zone have been received, compiled and condensed to the following:

------------------------------------...
-----
Drill Hole From (m) To (m) Core True Core True Weighted
Length Width Length Width Average
(m) (m) (ft) (ft) Ni(%)
------------------------------------...
------------------------------------...
------------------------------------...
------------------------------------...
LN08-136 194.06 241.70 47.64 29.33 156.30 96.23 0.243
------------------------------------...
and
------------------------------------...
251.00 330.40 79.40 48.88 260.50 160.37 0.313
------------------------------------...
contains 293.00 295.00 2.00 1.23 6.56 4.04 1.000
------------------------------------...
301.00 304.00 3.00 1.85 9.84 6.07 0.393
------------------------------------...
320.00 330.40 10.40 6.40 34.12 21.00 0.530
------------------------------------...
321.00 325.00 4.00 2.46 13.12 8.07 0.635
------------------------------------...
326.00 328.72 2.72 1.67 8.92 5.48 0.610
------------------------------------...
and
------------------------------------...
334.55 360.42 25.87 15.93 84.88 52.26 0.432
------------------------------------...
and contains 344.00 348.00 4.00 2.46 13.12 8.07 0.774
------------------------------------...
or 345.00 347.00 2.00 1.23 6.56 4.04 1.023
------------------------------------...
and 352.12 360.42 8.30 5.11 27.23 16.77 0.604
------------------------------------...
with 357.50 360.42 2.92 1.80 9.58 5.91 0.833
------------------------------------...
and
------------------------------------...
367.30 377.00 9.70 5.97 31.82 19.59 0.523
------------------------------------...
or 371.30 377.00 \5.70 3.51 18.70 11.52 0.744
------------------------------------...
or 372.10 374.00 1.90 1.17 6.23 3.84 1.052
------------------------------------...
------------------------------------...
------------------------------------...
------------------------------------...
LN08-137 117.40 130.70 13.30 10.48 43.64 34.38 0.246
------------------------------------...
and
------------------------------------...
148.13 149.84 1.71 1.35 5.61 4.43 1.271
------------------------------------...
or 148.13 149.32 1.19 0.94 3.90 3.08 1.710
------------------------------------...
------------------------------------...
------------------------------------...
------------------------------------...
LN08-138 142.00 163.11 21.11 15.44 69.26 50.66 0.264
------------------------------------...
232.70 234.50 1.80 1.32 5.91 4.33 0.255
------------------------------------...
------------------------------------...
------------------------------------...
------------------------------------...
LN08-139 170.50 186.50 16.00 12.78 52.49 41.93 0.269
------------------------------------...
and
------------------------------------...
216.10 223.00 6.90 5.51 22.64 18.08 0.201
------------------------------------...
------------------------------------...
------------------------------------...
------------------------------------...
LN08-140 172.79 205.40 32.61 24.23 106.99 79.49 0.307
------------------------------------...
or 184.00 193.00 9.00 6.69 29.53 21.95 0.373
------------------------------------...
and
------------------------------------...
220.45 236.70 16.25 12.08 53.31 39.63 0.352
------------------------------------...
and
------------------------------------...
243.00 266.17 23.17 17.22 76.02 56.50 0.297
------------------------------------...
------------------------------------...

The nickel bearing sulphide mineralization, with estimations ranging from 1% to 20% fine-grained disseminatations up to massive 100% sulphides, is contained within serpentenized komatiitic ultramaftic extrusive flows with occasional spinifex texture.

The assaying technique used is the industry standard for base metal assaying, which uses nitric and hydrochloric acids that extracts nickel only from sulphide mineralization and not from nickel silicate minerals.

The assaying of split core samples was conducted by Swastika Laboratories, and included the insertion of blanks and standards. The Qualified Person in charge of the Langmuir Project and the person who prepared the technical data in this release is Kian Jensen, B.Sc., P.Geo. (On), who is an arm's length party retained by the Company to carry out its exploration program on the Langmuir Project.

The TSX has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.