DOUBLE EAGLE (Cu,Ni,PGE) PROJECT, JAMES BAY LOWLANDS, ONTARIO

TORONTO, ONTARIO--(Marketwire - Dec. 13, 2007) - Noront Resources Ltd.
("Noront")(TSX VENTURE:NOT) is pleased to announce further progress of the
diamond drilling and geophysical program, as well as recently received
assay results on its' 100% owned Eagle One occurrence within Noront's
Double Eagle Project in the McFaulds Lake Area of northeastern Ontario. "To
date 27 holes have been completed totaling in excess of 5 kilometers of
drilling. Extremely high grade intersections of Nickel, Copper, Platinum
and Palladium over impressive widths continue to highly encourage
management at Noront. Preliminary analytical work on selected samples for
the other Platinum Group Elements (PGE's) suggest that Rhodium is also
present in the Eagle One occurrence, this could add significant value to
the zone's resource potential" states Richard Nemis, President and CEO of
Noront.

HIGHLIGHTS

- NOT-07-14 between 52.8 meters to 56.4 meters, 3.6 meters of massive
sulphides were intersected that averaged 3.43% copper, 7.45% nickel, 5.0
g/t platinum, 9.1 g/t palladium and 0.12 g/t gold, within part of a much
larger intersection between 45.9 to 80 meters (34.1 meters) that averaged
1.22% copper, 2.28% nickel, 1.6 g/t platinum, 4.13 g/t palladium and 0.14
g/t gold. In addition a lower grade zone exists from 80 to 110 meters
averaging 0.28% Cu, 0.59% Ni, 0.37 g/t Pt, 1.18 g/t Pd and 0.1 g/t Au.

- NOT-07-16 encountered a net-textured peridotite section combined with the
massive sulphide section over 12.7 meters between 121.1 and 133.8 averaging
1.55% Cu, 2.4% Ni, 2.63 g/t Pt, 5.1 g/t Pd, 0.12 g/t Au and 4.5 g/t Ag. A
lower grade section between 92.9 and 121.1 meters (28.2 meters wide)
averaged 0.50% Cu, 0.57% Ni, 0.47 g/t Pt, 1.5 g/t Pt, 0.17 g/t Au and 1.5
g/t Ag.

- NOT-07-17 to NOT-07-27 (excluding hole 26 that was abandoned) were all
completed to delineate the Eagle One Zone, and are reported upon
individually from below visual observations and are awaiting completion of
assay results.

- 20 selected samples (from holes 1, 2 and 5) tested for entire suite of
PGE's, preliminary results show presence of Rhodium, (highest value greater
than 1.0 g/t Rh), and all samples now need to be re-tested for Rhodium and
other PGE's.

- Airborne AeroTEM-2 survey is well underway by Aeroquest International
Limited, to November 26 they have flown 6,254 kilometers completing Phase I
of the survey, Phase II commenced on November 27, since then 3,752
kilometers have been completed in Phase II. Staking by Noront still
continues around the "Ring of Fire".

- Geological Consultant Jim Mungall, Ph.D. Associate Professor from
University of Toronto, who is now consulting exclusively for Noront, under
an agreement and pursuant to which, has been granted a 50,000 share stock
option exercisable at $4.86, visited project area in November, states: "If
the less than peridotite greater than intrusion is accepted to be a conduit
less than from a large intrusion greater than then it must be continuous
over considerable distances likely measurable in kilometers. Since diamond
drilling has shown that it is surrounded on all sides by older felsic
intrusive rocks at surface, logic dictates that it must continue at depth."

Noront has completed 5,046.6 meters of diamond drilling in 27 diamond drill
holes (not including two current holes that are underway) on the Eagle One
Ni-Cu-PGE occurrence since starting the drill program in late August. The
following table summarizes drill hole locations (based upon local and UTM
grid coordinates) and provides details of the drilling completed thus far.

The Universal Transverse Mercator (UTM) coordinate system is a grid based
method of specifying locations on the surface of the Earth. It is
universally recognized but differs from the traditional method of latitude
and longitude in several respects (taken from Google).

/T/

Table 1 Local Grid and UTM Co-ordinates For New Holes

------------------------------------...
North- East- Eleva- Len-
Drill hole ing (m) ing (m) Northing Easting azimuth dip tion gth
------------------------------------...
at
collar
Local Local (deg- (deg-
grid grid UTM UTM rees) rees) (mASL) (m)
------------------------------------...
NOT-07-20 1050 5083 5843528 547275 270 -61 0 144
------------------------------------...
NOT-07-21 1050 5083 5843528 547275 270 -73 0 183
------------------------------------...
NOT-07-22 1010 5121 5843525 547340 270 -62 0 61
------------------------------------...
NOT-07-23 1080 5108 5843562 547290 269 -78 0 293
------------------------------------...
NOT-07-24 1069 5174 5843600 547363 270 -42 0 233
------------------------------------...
NOT-07-25 1222 4945 5843563 547070 102 -46 0 307
------------------------------------...
NOT-07-26 1069 5174 5843600 547363 270 -52 0 75
------------------------------------...
NOT-07-27 5843637 547167 90 -45 0 183
------------------------------------...

/T/

Please note that the local grid collar locations are measured from the NW -
SE oriented un-surveyed picket lines, whereas the UTM (Universal Transverse
Mercator) co-ordinates are the GPS surveyed collar locations. The latter
should be used when plotting drill holes as this co-ordinate system
provides ease in relating the drilling to the geophysical and other
surveys. An up to date drill collar location plan of the area has been
added to the Noront website www.norontresources.com, showing locations of
all drill hole collar locations as well as highlights from each hole
drilled. This drill plan will continue to be updated as new information is
received.

/T/

New drill hole data (assays received)

------------------------------------...
Hole From To Int. Cu Ni Pt Pd Au Ag
(m) (m) (m) (%) (%) (g/t) (g/t) (g/t) (g/t)
------------------------------------...

------------------------------------...
NOT-07-
14 45.9 110 64.1 0.78 1.49 1.02 2.75 0.12 NA
------------------------------------...
including 45.9 80 34.1 1.22 2.28 1.6 4.13 0.14 NA
------------------------------------...
from 45.9 52.8 6.9 0.15 0.41 0.23 0.94 0.06 NA
------------------------------------...
followed
by 52.8 56.4 3.6 3.43 7.45 5 9.1 0.12 NA
------------------------------------...
followed
by 56.4 80 23.6 1.19 2.04 1.48 4.3 0.17 NA
------------------------------------...
followed
by 80 110 30 0.28 0.59 0.37 1.18 0.1 NA
------------------------------------...

------------------------------------...
NOT-07-
15 8.6 24 15.4 0.13 0.52 0.25 0.79 0.02 1.9
------------------------------------...

------------------------------------...
NOT-07-
16 92.9 133.8 40.9 0.67 1.03 1.04 2.5 0.15 2.0
------------------------------------...
from 92.9 121.1 28.2 0.5 0.57 0.47 1.5 0.17 1.5
------------------------------------...
followed
by 121.1 133.8 12.7 1.55 2.4 2.63 5.1 0.12 4.5
------------------------------------...

/T/

Please note that the drill intercepts mentioned herein are not true widths,
any reference to true width at this time in the exploration of the Eagle
One MMS occurrence would be misleading. The mineralized body is irregular
in shape, based upon the drilling to date and is best described below under
description of mineralized body.

New Hole Summaries (assays received)

NOT-07-13, was drilled with an azimuth of 104 degrees at -68 degrees
initial dip, from the same collar location as NOT-07-12. This hole was
designed to undercut the mineralized zone at depth below hole 12. The hole
was drilled to a depth of 254m and encountered granodiorite through it's
entire length, and had steepened to -72 degrees at the end, which did not
enable this hole to reach the targeted zone.

NOT-07-14 was positioned 20m east of hole NOT-07-12 and 13 with an initial
easterly azimuth of 104 degrees with an initial dip set at -45 degrees to
overcut hole #12. After 45.9 meters of granodiorite, NOT-07-14 intercepted
peridotite with sulphide mineralization from 45.9 to 110 meters. The total
width of 64.1 meters averaged 0.78% Cu, 1.49% Ni, 1.02 g/t Pt, 2.75 g/t Pd
and 0.12 g/t Au. Weakly mineralized peridotite was then intersected until
188m. The hole ended in granodiorite at 197m.

NOT-07-15 with a collar location of 50+15E, 11+20N in local grid
co-ordinates and an initial dip of -60 degrees with a 102 degrees azimuth
has been completed. This hole remained in weakly mineralized to barren
peridotite for its entire length of 132 meters (except for the first 8
meters of overburden and limestone). Assays from this hole over the first
part of the peridotite intersection where sulphides were observed, between
8.6 and 24 meters (15.4 meters) averaged 0.13% Cu, 0.52% Ni, 0.25 g/t Pt,
0.79 g/t Pd, 0.02 g/t Au and 1.9 g/t Ag. This hole overshot the main part
of the zone as it was collared too far east due to the presence of a small
lake.

NOT-07-16 was positioned with local grid coordinates of 51+08E, 10+80N and
drilled west at 269 degrees azimuth to explore the wide extent of the
peridotite above hole NOT-07-14 closer to surface and at depth to intersect
the zone below hole 12. NOT-07-16 was drilled at -45 degrees. This hole
encountered altered peridotite from 4.5 until 93 meters with minor sulphide
mineralization. From 92.9 to 121.1 meters, peridotite with disseminated
sulphides was encountered. From 121.1 to 133.0 meters, net-textured
peridotite with strong sulphide mineralization was intersected. From 133 to
133.8 meters, massive sulphides were encountered. After this point, a mafic
dyke mixed with granodiorite was encountered to the end at 155 meters.
Assays received for the total mineralized 40.9 meter section between 92.9
and 133.8 averaged 0.67% Cu, 1.03% Ni, 1.04 g/t Pt, 2.5 g/t Pd, 0.15 g/t Au
and 2 g/t Ag.

Drill hole summaries (assays pending)

NOT-07-17 is positioned at the same collar location as hole NOT-07-16 with
an initial dip of -60 degrees to undercut the mineralization encountered in
the upper holes. This hole intersected well mineralized peridotite at 98
meters and at 138 meters encountered net textured sulphides which continued
to 171 meters. Between 171 and 177.5 massive sulphide mineralization was
encountered, followed by altered peridotite to a depth of 178. The hole
then entered granodiorite and was stopped at 191 meters total depth.

NOT-07-18 is also positioned at the same collar location as hole NOT-07-17
and NOT-07-16 undercutting the mineralization encountered in the two latter
holes. The initial dip of this hole was set at -69 degrees. Between 105.2
meters and 132.5 meters the hole entered well mineralized peridotite, then
it entered into a long section of net textured peridotite between 132.5 to
191.7 meters. From 191.7 to 230 meters semi-massive to massive sulphides
were intersected before the hole encountered granodiorite.

Holes numbered NOT-07-19 to NOT-07-22 were completed along an E-W section
representing a 37.5 meter step-out section to the south.

Hole NOT-07-19 was drilled at local grid collar location 50+83E at 10+50N
with an initial azimuth of 270 degrees and an initial dip of -45 degrees.
Peridotite was intersected at 20.1 meters downhole, variably mineralized
between 46.5 and 64.5 meters. This hole then entered weakly mineralized
peridotite, between 64.5 meters and 74.2 meters downhole, then from 94.5 to
103.3 the mineralization increased getting more pervasive until around 109
meters downhole, intersecting a few mafic and felsic dikes. Between 109 and
109.2 massive sulphide was intersected, followed by altered peridotite
until 110.8 when granodiorite and another mafic dike was encountered to the
end of the hole at 132 meters.

Hole NOT-07-20 was drilled at local grid collar location 50+83E at 10+50N
with an initial azimuth of 270 degrees and an initial dip of -61 degrees to
undercut hole NOT-07-19. After a few meters of overburden and limestone the
hole entered granodiorite at 12 meters, then went into peridotite at 17.2
meters and then in and out of peridotite and olivine gabbro dikes until
48.6 meters. At 48.6 to 103.8 meters the hole entered weakly mineralized
peridotite, followed by another mafic dike between 103.8 and 113.9 meters.
Then, well mineralized peridotite was encountered between 113.9 to 125.1
meters. Another mafic dike was encountered to 128.2 followed by
granodiorite to the end of the hole at 144 meters.

Hole NOT-07-21 was drilled at local grid collar location 50+83E at 10+50N
with an initial azimuth of 270 degrees and an initial dip of -73 degrees to
undercut hole NOT-07-20. Similarly to hole 20, this hole encountered the
same set of olivine gabbro dikes and peridotite between 11.7 and 35.0
meters downhole, then a weakly mineralized to barren peridotite was
encountered to 144 meters. Well mineralized peridotite was encountered
between 144 and 162 meters with a short felsic dike between 150 and 151
meters. Then semi-massive sulphides were encountered between 162 and 173.8
meters followed by weakly mineralized peridotite to 174.8. A mafic dike was
then intersected between 173.8 and 184 meters, followed by granodiorite to
end of this hole at 183 meters.

Hole NOT-07-22 was drilled at local grid collar location 51+21E at 10+10N
with an initial azimuth of 270 degrees and an initial dip of -62 degrees.
The hole entered granodiorite at 13.5 meters to 154.7 meters. At 154.7 the
hole entered a strongly deformed and brecciated unmineralized peridotite
and remained in this rock unit until 209 meters when it entered olivine
gabbro. At 215.8 a barren peridotite was encountered to 222.4 then a short
massive sulphide section was encountered to 223.5 meters (only 1.1 meters
thick). Peridotite with minor sulphides were encountered until 244.5 then
granodiorite was encountered to end of hole at 258 meters. This hole is
interpreted as having just caught the bottom of the southerly plunging zone
at a vertical depth of 200 meters.

Hole NOT-07-23 was drilled on local grid collar location 51+08E at 10+80N
with an initial azimuth of 269 degrees and an initial dip of -78 degrees.
After passing through 5.5 meters of overburden and limestone, this hole
immediately entered peridotite (with a felsic dike) until 228.2 meters,
when the hole entered granodiorite until 241.1 meters. The hole then went
back into a mineralized peridotite until 224.4 then into semi-massive
sulphides between 242.4 and 243.2 meters after which the hole entered
granodiorite until it was terminated at 293 meters. This hole along an E-W
section 37.5 meters north of hole NOT-07-22, also has been interpreted as
encountering the bottom of the southerly plunging zone at a vertical depth
of 235 meters.

Hole NOT-07-24 was drilled on local grid collar location 51+74E at 10+65N
with an initial azimuth of 270 degrees and an initial dip of -42 degrees,
designed to undercut discovery holes NOT-07-01 and 02. After passing
through overburden, limestone to a depth of 16 meters the hole entered
granodiorite and stayed in this rock unit until 65.4 meters when the hole
encountered a mafic dike until 76.3 meters. The hole then reentered
granodiorite until 83.1 meters. An olivine rich gabbro was then encountered
between 83.1 and 100.4 meters. Barren peridotite was encountered between
100.4 until 119 meters downhole. Then mineralized peridotite to 140 meters,
then net textured mineralized peridotite was encountered between 140 meters
and 187.8 meters followed by a 2.7 meter wide massive sulphide section
until 190.7 meters downhole for a total mineralized zone width of 71.7
meters. The hole then entered a contact zone with the granodiorite and
peridotite, in and out of granodiorite, ending in granodiorite between 220
and 233 meters.

Hole NOT-07-25 was drilled at local grid collar location 49+55E at 12+22N
with an initial azimuth of 102 degrees and an initial dip of -46 degrees.
This hole entered granodiorite at 18 meters then went into a mafic dike
between 43 meters and 52.3 meters then back into granodiorite with numerous
mafic dikes and felsic dikes until 252.7 meters. Highly altered peridotite
(to serpentinite) was encountered between 252.7 meters and 277.8 meters.
The hole went in and out of peridotite and mafic dikes until 301.5 meters.
At 301.5 granodiorite was encountered and the hole was stopped at 307
meters. This hole is believed to have deviated severely southwards not
encountering the peridotite intrusive until 252.7 meters as opposed to the
expected down hole depth of 180.0 meters. With the exception of minor
copper mineralization in the hanging wall granodiorite the hole encountered
no visible sulphide mineralization to the end of the hole at 307 meters.
Downhole surveying must be awaited before the actual location of this hole
can be determined.

Hole NOT-07-26 was drilled at local grid collar location 51+74E at 10+69N
with an initial azimuth of 270 degrees and an initial dip of -52 degrees.
This hole encountered drilling problems due to faulty equipment downhole
and was lost at 75 meters, well short of the intended target. Hole
NOT-07-26 was restarted as Hole NOT-07-28 from the same collar location at
-51 degrees, and is still underway.

Hole NOT-07-27 was drilled at local grid collar location 50+60E at 12+15N
with an initial azimuth of 90 degrees and an initial dip of -45 degrees.
After passing through 16.8 meters of overburden and limestone this hole
entered granodiorite and remained in granodiorite until 112.5 meters, when
it entered mineralized peridotite until 117 meters downhole. Massive
sulphides were then encountered between 117 and 152 meters followed by
semi-massive sulphides until 155 meters. Mineralized peridotite was then
encountered for the next 10 meters until 162 meters, followed by 6 meters
(until 168 meters) of weakly mineralized to barren peridotite. The hole
then entered granodiorite and was terminated at 183 meters. This hole was
drilled along the same E-W section as holes NOT-07-05, 06, 07, and 08 to
delineate the mineralized zone in more detail.

Rhodium Present

A series of samples from hole 1, 2 and 5 were selected based upon the
presence of significant grades of platinum and palladium in the first pass
analysis. Twenty samples were re-submitted for the total suite of Platinum
Group Elements (PGE's) to ALS Chemex, using their process code PGM-MS26 for
Pt, Pd, Ir, Os, Rh, Ru and Au, an additional assay using ALS Chemex
processing code Rh-MS25 was also requested. The latter sample procedure is
done in Canada while the former procedure requires the samples be sent to
ALS Chemex lab in Australia. The same set of 20 Samples have also been
submitted to ACTLABS in Ancaster, Ontario as part of a lab-lab comparison.
Results from the Rhodium specific analysis have been received, the results
range from 0.002 g/t to greater than 1 g/t. The results, while not being
conclusive, suggest that Rh is present in the Eagle One occurrence,
consequently all samples must now be analyzed for Rh as well as the other
PGE's. Noront will provide details of this study at a later date.

The spot price of rhodium has risen from a spot price of $452/oz on January
2004 to $6,725/oz. on December 12, 2007. A basic introduction to rhodium
can be found on www.kitco.com:

"Rhodium is a silver-white metallic element, is highly resistant to
corrosion, and is extremely reflective. It is used as a finish for jewelry,
mirrors, and search lights. It is also used in electric connections and is
alloyed with platinum for aircraft turbine engines. Another use is
manufacturing of nitric acid and used in hydrogenation of organic
compounds. Rhodium usage is dominated by autocatalyst applications where it
is used together with platinum and palladium to control exhaust emissions."

Site Visit by James Mungall (Ph.D.)

During early November, the core from the Eagle One occurrence (up to hole
22) was reviewed by Dr. James Mungall, P.Geo., an Associate Professor in
the Geology Department at the University of Toronto, specializing in
Magmatic Massive Sulphides. Dr. Mungall completed a site visit report dated
November 19, 2007 that includes the following summary and conclusion (taken
verbatim from his report):

"The large amounts of sulfide and of ultramafic cumulate make it absolutely
clear that the Eagle One deposit has formed in a magmatic conduit. No magma
could have carried the observed amount of sulfide in solution, therefore
the sulfides have been left behind by a through-going volume of magma much
greater than what presently remains in the intrusion."

Dr. Mungall goes on to state "If the intrusion is accepted to be a conduit
then it must be continuous over considerable distances likely measurable in
kilometers. Since diamond drilling has shown that it is surrounded on all
sides by older felsic intrusive rocks at surface, logic dictates that it
must continue at depth. The prospects for continued extension of the
mineralized body to depth are excellent, as long as it is not lost in a
fault zone&. Although the rapid deepening of the conduit is somewhat
discouraging, the presence of a weak magnetic feature south of the Eagle
One deposit, that connects to the much more prominent magnetic feature to
the south, may indicate that the plunge shallows at depth."

In conclusion and with reference to scope of the project he continues with
"The origins of the sulfides are slightly problematic. It is generally
accepted that in order to form a mass of immiscible sulfide liquid on the
scale observed at Eagle One, a mafic or ultramafic magma must become
contaminated by sulfide-rich crustal rock. At its present level of exposure
the mineralized intrusion is entirely surrounded by sulfur-poor felsic
intrusive rocks, leaving the origin of the required sulfide in doubt. I
suggest that the presence of abundant magnetite-rich xenoliths in the
intrusion records a previous episode of assimilation of iron formation,
which has added sufficient sulfide to the magma to induce sulfide liquid
saturation. The conduit has carried the slurry of sulfide droplets and
small xenoliths to their current location, requiring transport over
considerable distances. This in turn suggests that the Eagle One deposit
resides within a large magmatic system with lateral extents at least as
great as the distance to the nearest iron formation, which may be
represented by the very prominent magnetic lineament to the south of the
deposit."

Expanded program

Two drills have been working through the freeze up period on the Eagle One
occurrence. The last fixed wing flight serviced the camp on November 2, the
first fixed wing flight returned to the camp on November 30 to start the
winter servicing of the base camp. The camp was serviced by two helicopters
during the freeze up period, the second helicopter was released.

The new drill camp construction was completed by mid November, and is
within walking distance to the Eagle One MMS occurrence and main drill
area. The crews for the two drill-rigs moved to the new campsite by the
second week of November. This move minimized the downtime due to weather
and the helicopter not being able to service the drill for shift changes,
however additional unacceptable problems with drill equipment were
encountered during this recent period, which greatly affected the amount of
drilling completed. To alleviate this problem in the future, two new drills
have been contracted from a new drill service provider (Forage Orbit
Garant) from Val D'Or Quebec, that are scheduled to arrive in mid January
2008.

Preliminary ground geophysical surveys are starting to be compiled and are
currently being reviewed, focused on the Eagle One occurrence and its
immediate surrounds. Linecutting and ground geophysics continues to the
south and west of the Eagle One occurrence. The airborne survey contract
awarded to Aeroquest International Limited using their helicopter mounted
AeroTEM-2 system is well underway. Phase I was completed on November 26,
for a total of 6,254 kilometers of flying. Participants in the collective
airborne survey have been notified of the completion of Phase I, and those
participants will be invited to review their information as soon as can be
arranged. Phase II of the airborne survey started on November 27 focusing
towards the north of the Phase I area, this phase starts just north of the
McFaulds VMS occurrences and continues northward around the "Ring of Fire".
It is anticipated that this phase will be completed prior to Christmas
shutdown, then Phase III will begin in early January 2008.

On Site Quality Assurance / Quality Control Measures

The aforementioned assay and sample information, as well as geological
descriptions are taken from drill logs as prepared by two site geologists
for the drill program, Dr. Howard Lahti, P.Geo., of Fredericton, New
Brunswick and Mike Kilbourne, geologist from Newmarket, Ontario. Billiken
Management Services Inc. is providing all services on site for the Noront
Double Eagle Project, from their base camp at McFaulds Lake. Billiken is a
holder of Certificate of Authorization issued by the Association of
Professional Geoscientists of Ontario.

All assay work and sampling procedures have been included in earlier news
releases. Chain of Custody includes delivery to ALS Chemex Laboratory in
Vancouver BC, where all samples undergo analysis using ALS Chemex assay
procedure AA46 for nickel, copper and silver, and ICP24 for Au, Pt, and Pd.
When samples received over-limit values they underwent further analysis
using ALS Chemex assay procedure ICP27 (for gold, platinum and palladium),
as well as GRA21 for gold. The reader is referred to: www.alschemex.com for
details of these analytical procedures.

Independent Quality Assurance and Quality Control Protocol

Gold, platinum and palladium are assayed using fire assay on a 50 gram
nominal sample weight with an ICP-AES finish. Nickel and copper are assayed
using aqua regia (3-acid) digestion with either ICP-AES or AAS finish. A
comprehensive QA/QC program has been implemented to monitor all assays on
the Double Eagle Project. Samples are assembled in numbered batches of 77
samples, which equates to the number of client samples per furnace batch at
ALS Chemex. Included in each batch of 77 samples are 4 certified reference
material samples, 3 blank samples comprised of sterile drill core, and 4
field duplicate samples. This QC program was set up for Noront by Tracy
Armstrong P.Geo, of P&E Mining Consultants Inc. ("P&E") of Brampton,
Ontario. Ms. Armstrong is a qualified geologist in the Provinces of Ontario
and Quebec. Assay results are being monitored on an on-going, real time
basis for accuracy, contamination and precision by P&E. The current sample
set will be reviewed by Ms. Armstrong once some additional batches are
completed, and will be reported upon in a timely manner.

This press release includes certain "Forward-Looking Statements" within the
meaning of the US Private Securities Reform Act of 1995. Other than
statements of historical fact, all statements are "Forward-Looking
Statements" that involve such various known and unknown risks,
uncertainties and other factors. There can be no assurance that such
statements will prove accurate. Results and future events could differ
materially from those anticipated in such statements. Readers of this press
release are cautioned not to place undue reliance on these "Forward-Looking
Statements".

This press release has been prepared by management of Noront Resources
Ltd., and has been approved for dissemination by Neil Novak P.Geo., a
director and recently appointed Vice President Exploration of Noront, being
a Qualified Person under Canadian Securities guidelines.

Noront is a tier 2 junior resource company on the TSX Venture Exchange,
trading symbol NOT, with 118,354,582 shares issued to date.

Investors are invited to visit the Noront Resources IR Hub at
www.agoracom.com/IR/Noront where they can post questions and receive
answers or review questions and answers already posted by other investors.
Alternatively, investors are able to e-mail all questions and
correspondence to NOT@agoracom.com where they can also request to be added
to the investor e-mail list to receive all future press releases and
updates in real time.

ON BEHALF OF THE BOARD OF DIRECTORS

R. Nemis, President and Chief Executive Officer

-30-

FOR FURTHER INFORMATION PLEASE CONTACT:

Noront Resources Ltd.
Richard Nemis
(416) 864-1456
(416) 367-5444 (FAX)
Email: info@norontresources.com
Website: www.norontresources.com

The TSX Venture Exchange has not reviewed and does not accept
responsibility for the adequacy or accuracy of this release.