VANCOUVER, BRITISH COLUMBIA--(Marketwire - June 15, 2011) - Sunridge Gold Corp. (TSX VENTURE:SGC) announces that recent drill results from the Emba Derho copper-zinc-gold deposit have extended the known mineralization and intercepted significant widths and grades. The 5,000 meter diamond drill program has provided new assay data, additional geo-technical data, and metallurgical samples to be used in the ongoing pre-feasibility study that includes Emba Derho and the nearby Adi Nefas and Gupo Gold deposits. These three deposits make up the Asmara North project, part of the Asmara Project, Eritrea. Emba Derho is a large volcanogenic massive sulphide deposit that has a surface gold zone underlain by zinc and copper zones.

Highlights

--  ED-268-D: Intersected 47.25 meters averaging 1.89% copper and 80.25

    meters averaging 1.17% copper 

--  ED-271-D: Intersected 90.54 meters averaging 5.49% zinc including 24

    meters averaging 7.34% zinc and 35 meters averaging 6.44% zinc 

--  ED-273-D: Intersected 142.79 meters averaging 5.16% zinc including 26.80

    meters averaging 8.63% zinc 

--  ED-274-D: Intersected 32.35 meters averaging 1.72% copper 

A summary of significant results follows:

---------------------------------------- ------------------------------------

                 From      To  Interval-                                    

Drill Hole     meters  meters    meters  Gold g/t Silver g/t Copper % Zinc %

---------------------------------------- ------------------------------------

ED-266-D(i)   Drilled for geotechnical data - not sampled                   

---------------------------------------- ------------------------------------

ED-267-D(i)   Drilled for geotechnical data - not sampled                   

---------------------------------------- ------------------------------------

ED-268-D        55.85   96.75     40.90       0.23      11.27    0.22   2.33

Incl.           55.85   75.85     20.00       0.38      19.05    0.30   4.02

And            112.30  159.55     47.25       0.27      12.83    1.89   0.70

And            175.15  255.40     80.25       0.16       8.82    1.17   1.09

Incl           175.15  206.25     31.10       0.24      13.53    1.85   1.08

And incl       221.80  255.40     33.60       0.12       7.25    1.03   0.52

---------------------------------------- ------------------------------------

ED-269-D(i)   Drilled for geotechnical data - not sampled                   

---------------------------------------- ------------------------------------

ED-270-D(i)   Drilled for geotechnical data - not sampled                   

---------------------------------------- ------------------------------------

ED-271-D       121.75  212.29     90.54       0.25       4.23    0.21   5.49

Incl           121.75  147.23     24.00       0.23       4.63    0.19   7.34

And incl       152.23  187.23     35.00       0.07       2.84    0.22   6.44

And            247.93  364.74    114.81      0.051       3.82    0.78  0.097

---------------------------------------- ------------------------------------

ED-272-D(i)   Drilled for geotechnical data - not sampled                   

---------------------------------------- ------------------------------------

ED-273-D        49.21  235.97    186.76       0.49       9.84   0.084   4.44

incl            49.21  192.00    142.79       0.31      10.22    0.07   5.16

And incl        99.30  126.10     26.80       0.13       7.05    0.01   8.63

And incl       169.10  192.00     22.90       0.16       9.55    0.09   8.12

---------------------------------------- ------------------------------------

ED-274-D        47.35   79.70     32.35       0.21      13.17    1.72   1.10

And             87.72  111.70     23.98       0.10       5.79    1.00   0.41

---------------------------------------- ------------------------------------

ED-275-D      Drilled for geotechnical data - not sampled                   

---------------------------------------- ------------------------------------

ED-276-D       425.30  432.70     17.40       0.36      18.36    1.17   4.93

---------------------------------------- ------------------------------------

(i) Geotechnical holes were drilled to collect samples for rock competency  

tests in order to optimize pit slopes for the proposed Emba Derho open pit  

mine design as part of the pre-feasibility work.                            

Diamond drill holes ED-268, 271 and 273 were drilled to test the Emba Derho Main mineralized synclinal structure at depth and were successful in extending the mineralized zone for another 50 to 70 meters. - To view a map and cross-section please visit the following link: http://media3.marketwire.com/docs/sgc615i.pdf.

Diamond drill hole ED-276-D was successful in extending mineralization about 50 meters along strike to the Northeast.

Diamond drill hole ED-274-D was drilled to test the middle of the three Emba Derho mineralized synclinal structures at depth and take samples for metallurgy and dense media separation (DMS) tests. This drill hole was successful in confirming the grades of copper and zinc as well as the width of the mineralized structure.

Notes:

1.  All drill holes reported are diamond drill holes.

      

2.  Drill intercept lengths only are reported in the tabulations; it is

    estimated that true width will be approximately 80% of the reported

    drill intercept length.

      

3.  A Quality Assurance / Quality Control program is part of the drilling

    program on the Asmara Project. This program includes chain of custody

    protocol as well as systematic submittals of standards, duplicates and

    blank samples into the flow of samples produced by the drilling.

      

4.  A description of the geology, sampling procedures, and the Company's

    laboratory Quality Assurance / Quality Control procedures are as

    described in each of the Company's most recent National Instrument 43-

    101 Technical Reports filed and dated March 15, 2007. These reports are

    available on the Company's profile at http://www.sedar.com.

      

5.  Samples are prepared at African Horn Testing Services (Eritrea) and

    analyzed at Genalysis Laboratories (a NATA registered laboratory) in

    Perth Western Australia.

      

6.  The Qualified Person responsible for the release of this exploration

    information is Michael Hopley, President and Chief Executive Officer of

    Sunridge Gold Corp. 

Current Emba Derho Resource:

The September 10, 2008 Wardrop Engineering Inc. Indicated resource estimates for Emba Derho are summarized as follows:

---------------------------------------- ------------------------------------

                  Cut-off   Million                                         

Zone                grade    Tonnes  Copper %    Zinc %  Gold g/t Silver g/t

---------------------------------------- ------------------------------------

Gold Oxide     0.2 g/t Au      3.51      0.06      0.04      0.84       5.14

---------------------------------------- ------------------------------------

Copper-rich                                                                 

Primary           0.5% Cu    38.425      1.02      0.99      0.18       9.31

---------------------------------------- ------------------------------------

Zinc-rich                                                                   

Primary           1.0% Zn    20.545      0.28      2.35      0.39      12.13

---------------------------------------- ------------------------------------

ABOUT SUNRIDGE:

Sunridge is a mineral exploration and development company focused on the acquisition, exploration, discovery and development of base and precious metal projects on the Asmara Project in Eritrea and exploration properties in Madagascar. Sunridge currently has approximately 117 million shares outstanding and approximately $18.5 million in cash. Sunridge trades on the TSX Venture Exchange under the symbol SGC. For additional information on the Company and its projects please view the slide show on our website at http://www.sunridgegold.com.

SUNRIDGE GOLD CORP.

Michael Hopley, President and Chief Executive Officer

This news release contains forward-looking statements that are based on the Company's current expectations and estimates. Forward-looking statements are frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words or statements that certain events or conditions "may" or "will" occur. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from estimated or anticipated events or results implied or expressed in such forward-looking statements. Such factors include, among others: the actual results of current exploration activities; conclusions of economic evaluations; changes in project parameters as plans to continue to be refined; possible variations in ore grade or recovery rates; accidents, labour disputes and other risks of the mining industry; delays in obtaining governmental approvals or financing; and fluctuations in metal prices. There may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.