Free
Message: emit....

Re: emit...

in response to by
posted on Jun 15, 2009 05:36PM

Put our OS on the server and push it to them in many new and innovative areas/ways, kiosks, and or go after Microsofts Hydra., lol

''A thin client (or a lean client) is a network computer without a user writable long term storage device, which, in client/server applications, is designed to be especially small so that the bulk of the data processing occurs on the server. The embedded OS in a thin client is stored in a "flash drive", in a Disk on Module (DOM), or is downloaded over the network at boot-up. The embedded OS in a thin client usually uses some kind of write filter so that the OS and its configuration can only be changed by administrators''

Since 2006 there has been a growing interest in using Thin Client technology in hazardous areas, such as oil & gas exploration, military mobile use to monitor gen sets and mobile missile installations, and in industry in Zone 1 areas where hardened industrial computers can be prohibitively expensive. Thin Client hardware is easier to seal against environmental hazards and contamination, and can sometimes withstand a wider temperature and vibration level, due to simplified components and lack of moving parts, such as hard drives and cooling fans.

Thin Clients are also a natural choice for operator interface displays in manufacturing areas where a rugged tamper proof solution is required, and where limited "stateless" applications such as Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) software is the standard. "PC" on a plant floor usually stands for "Problem Center".[citation needed]

Flash memory is a critical component of these Thin Client terminals. With sufficient Flash (solid-state) memory and the ability to install user firmware and PCI cards, a Thin Client can perform most of the functions that a user would want to perform at these locations, typically called "point-of-attack" or "rig floor". The Thin Client can be equipped with a sealed membrane keypad for operator interface, and I/O (input/output) connectors that allow the Thin Client to be hooked up to a remote location and perform data recording of processes or history of connected device readings, that could be anything from radar to pumps to drilling apparatus.

Industrial Thin Clients typically operate on embedded software systems such as Linux, Windows CE.net, or Windows XP Embedded Ethernet. Industrial clients typically prefer an OS (operating system) environment in which the Thin Client can easily interface with proprietary firmware (software embedded in memory on a PCB card), and communications often interface with a hosting central computer in a safe environment control room. Ethernet protocol is a preferred network means of interfacing the computers, Thin Clients, and devices being monitored and controlled''

http://en.wikipedia.org/wiki/Thin_cl...

''This increases demand for communications connectivity, computer utilization and efficiencies. It also drives the convergence between communications, computing, media and CPE devices, greatly expanding the size of the market. We believe that the added utility from receiving computing/communication capabilities wirelessly on a thin device is the killer application.''

http://agoracom.com/ir/edigital/foru...


e





Share
New Message
Please login to post a reply