White Pines news- on NOT's JV
posted on
Jun 26, 2009 12:19PM
NI 43-101 Update (September 2012): 11.1 Mt @ 1.68% Ni, 0.87% Cu, 0.89 gpt Pt and 3.09 gpt Pd and 0.18 gpt Au (Proven & Probable Reserves) / 8.9 Mt @ 1.10% Ni, 1.14% Cu, 1.16 gpt Pt and 3.49 gpt Pd and 0.30 gpt Au (Inferred Resource)
White Pine Resources-Noront Resources-Golden Valley Mines Intersect Significant Zn-Cu-Ag Values in Multiple Anomalies
12:00 EDT Friday, June 26, 2009
|
TORONTO, ONTARIO--(Marketwire - June 26, 2009) - White Pine Resources (TSX VENTURE:WPR)("White Pine")(formerly WSR Resources), Noront Resources (TSX VENTURE:NOT)("Noront") and Golden Valley Mines (TSX VENTURE:GZZ)("Golden Valley") Joint Venture Project along the Ring of Fire in the James Bay Lowlands, is pleased to report that several promising new Zn-Cu-Ag Volcanogenic Massive Sulphide ("VMS") discoveries were intersected in the recent first phase drilling program on the joint venture project.
The Luc Bourdon and Bourdon West properties (a combined 8,944 hectares) were staked by Golden Valley in the 'Ring of Fire' in the spring of 2008. This ground was subsequently optioned to White Pine and Noront in August 2008, whereas White Pine and Noront could equally earn a combined undivided 70% of the property by incurring expenditures of $5 million within 3 years of the agreement date. White Pine is the operator of the joint venture.
In the fall of 2008, an airborne VTEM geophysics program was completed over the properties, which outlined several high priority drill targets all spatially associated with the 5.01 Zn-Cu-Ag discovery made last year by White Pine Resources and Metalex Ventures. Drilling recently commenced in late April on these geophysical anomalies with the objective to test 5 of the stronger VTEM targets. The program has now been completed having drilled 1,473m through 12 holes in 6 targets. All the targets produced semi-massive to massive sulphides over various widths and 5 out of the 6 targets drilled carried significant to elevated base metal values. Four of the six VTEM targets tested produced significant to elevated Zn-Cu-Ag values, and one anomaly had anomalous Ni-Cu-Pt-Pd-Au values. Details of the drill program are tabled below:
TABLE 1. Drill hole locations in the order they were drilled. Anomaly Hole # UTM n UTM e Azi Dip Length ------------------------------------------------------------------- ------------------------------------------------------------------- G4 G4-09-01 5896483 519991 120 -50 130 Bourdon West BW-09-01 5900243 504845 0 -50 105 G1 G1-09-01 5903947 515396 315 -50 90 G1 G1-09-02 5903947 515396 315 -80 113 G1 G1-09-03 5903944 515452 335 -50 109 G1 G1-09-04 5903902 515361 335 -50 96 G1 G1-09-05 5903902 515361 335 -75 140 G3 G3-09-01 5904665 520344 0 -50 91 G3 G3-09-02 5904665 520344 0 -75 103 G7 G7-09-01 5901645 529784 0 -90 97 G6 G6-09-01 5902070 522500 270 -50 139 G6 G6-09-02 5902070 522605 270 -50 264 TABLE 2. Drilling results. Anomaly Hole No. From To Interval Zn% Cu% Ag (m) g/t ------------------------------------------------------------------------- ------------------------------------------------------------------------- G4 G4-09-01 92.35 94.45 2.10 0.45 0.59 4.9 G1 G1-09-01 36.90 45.60 8.70 3.73 0.90 25.7 including 36.90 42.60 5.70 5.60 0.90 34.9 G1 G1-09-02 80.30 97.40 17.10 1.70 0.36 5.4 including 80.30 85.80 5.50 5.10 0.39 5.7 G1 G1-09-03 79.30 79.75 0.45 0.85 0.15 5.3 G1 G1-09-04 70.20 71.90 1.70 1.67 0.34 11.2 G1 G1-09-05 122.00 128.60 6.60 0.78 1.29 16.8 G3 G3-09-01 56.10 68.35 12.25 0.34 0.10 5.3 G3 G3-09-02 86.45 93.60 7.15 0.83 0.13 6.1 including 86.45 89.30 2.85 1.20 0.15 6.8 G7 G7-09-01 NSA G6 G6-09-01 69.10 77.80 8.70 1.40 0.10 8.7 G6 G6-09-02 189.00 199.40 10.40 1.00 0.05 5.5 Bourdon West From To Interval Ni% Cu% Pt Pd (m) ppb ppb ------------------------------------------------------------------------- ------------------------------------------------------------------------- BW-09-01 36.3 37.2 0.9 0.23 0.10 7 40 Intervals may not represent true width.
The exploration program was managed by White Pine for the Joint Venture partners under supervision of Mike Kilbourne, P.Geo, President, White Pine Resources Inc. Mr. Kilbourne prepared this release and states, "White Pine is very excited about this potential new VMS belt. This program was designed and budgeted to test some of the more prominent VTEM anomalies spatially associated with the 501 discovery. Five of the six anomalies we drilled produced some very encouraging results coupled with mineralogical and geological indications typical of VMS deposits. These anomalies are spread out over many kilometres suggesting a very active VMS environment in an unexplored greenstone belt. The G3 anomaly alone is outlined by VTEM for 1200m in strike length. The G6 anomaly, a very weak VTEM response, was not considered a primary target at all and was only drilled due to the proximal location (500m northeast) of the 501 discovery. There are numerous VTEM anomalies with the same geophysical signature as G6 in this belt that will need testing. This area of the Ring of Fire has the potential to develop into a major VMS camp."
On-site Quality Assurance/Quality Control Measures
All samples have been shipped to ACTLABS preparation laboratory in Thunder Bay Ontario. Analyses will be performed in the ACTLABS laboratory in Ancaster, Ontario. All core samples were selected by the White Pine site geologist, and were cut in half by diamond core saw. Individual samples were labeled, placed in plastic sample bags and sealed. Groups of samples were then placed into durable rice bags that were secured by project security tags for shipping. The remaining coarse reject portions of the samples remain in storage at the ACTLABS preparation laboratory storage facility in Thunder Bay as required in the event that further work is needed.
Independent Quality Assurance and Quality Control Protocol
A QA/QC program has been implemented to monitor all assays from the current drilling program. Samples are assembled in numbered batches of 35 samples. Included in each batch of 35 samples are two certified reference standards, two laboratory duplicates, one blank sample comprised of sterile drill core and one core duplicate sample. This QC program was set up for White Pine Resources by Tracy Armstrong, P.Geo, of T.J. Armstrong Geological Consulting Inc. Ms. Armstrong is a qualified geologist in the Provinces of Ontario and Quebec.
Forward looking statements: Certain information set forth in this news release may contain forward-looking statements that involve substantial known and unknown risks and uncertainties. These forward-looking statements are subject to numerous risks and uncertainties, certain of which are beyond the control of WPR, including but not limited to the impact of general economic conditions, industry conditions, volatility of commodity prices, risks associated with the uncertainty of resource and reserve estimates, currency fluctuations, dependence upon regulatory approvals, the unavailability of future financing and exploration risk. Readers are cautioned that the assumptions used in the preparation of such information, although considered reasonable at the time of preparation, may prove to be imprecise and as such, undue reliance should not be placed on forward-looking statements.
Shares Outstanding: 17,592,660
FOR FURTHER INFORMATION PLEASE CONTACT:
White Pine Resources John Tait Chief Executive Officer (416) 628-5905 jtait@347bay.com www.wprres.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
© Copyright CCNMatthews |